Never let the elements keep you from pursuing your passions. Introducing the Fenix HM50R Rechargeable LED Headlamp with its lightweight and indestructible body. Don’t let its small size fool you; this headlamp is power packed throwing a beam to a max range of over 250 feet. Its surprisingly long run time at lower settings and fantastic value makes it the perfect partner to take camping, hiking or running when your goal is to extend your day.
- Cree XM-L2 U2 white LED with a maximum output of 500 lumens
- Output and Runtime:
- 500 Lumens – 2.5hrs
- 130 Lumens – 10hrs
- 30 Lumens - 24hrs
- 4 Lumens - 90hrs
- Length: 67.5mm
- Width: 33mm
- Height: 28mm
- Weight: 63g excluding battery
Fenix HM50R Headlamp, Spare O-ring, Spare rubber anti-dust cover, Silicone holder, ARB-L16-700 li-ion battery, Charging cable.
ON/OFF: Press and hold the switch for 0.5 seconds to turn on/off the headlamp.
With the headlamp switched on, single click the switch to cycle through Low→Med→High→Turbo.
Note: The headlamp memorizes the last selected brightness. When turned on again the previously used brightness level will be recalled.
Battery level indication
With the headlamp switched off, single click the switch to display the battery level for 3 seconds in different colors:
Green constant on: more than 80%
Green flashes: 50% - 80%
Blue constant on: 20% - 50%
Blue flashes: less than 20%
Uncover the anti-dust cap and plug the Micro USB terminal of the charging cable into the charging port of the headlamp. Once charging is completed, be sure to remove the charging cable and replace the anti-dust cap. The max charging current is 700mA, and the charging time is about 1.5 hours. The indicator displays blue when charging, and turns green when fully charged. The headlamp can only be used on Med output when charging.
Warning: Do Not charge non-rechargeable batteries.
Intelligent Overheat Protection
The light will accumulate a lot of heat when used on Turbo output level for extended periods. When the light reaches a temperature of 65°C or above, the light will automatically downshift to High output to reduce temperature. Reset to Turbo if needed.
Low Voltage Downshift
When the voltage of the 16340 battery in use drops lower than 3.0V, the low voltage downshift function will be activated. In this state the headlamp cannot be used on Turbo output and will only cycle through High, Med and Low.
The headlamp will automatically step down by a few lumens after being used for an extended period on any of the High, Med or Low outputs, to extend runtime and to guarantee illumination outdoors.
Use as a flashlight
Remove the tail cap and the battery, then remove the headlamp from the holder. Re-insert the battery and screw back the tail cap.